How To Make A Hanging Jewelry Organizer

Hanging jewelry organizers are very useful things to have around the house. Not only do they allow you to de clutter your jewelry collection they are also cheap and easy to make.

There are a few things that we need to collect before we can start to make the hanging jewelry organizer.

The materials that we need are a piece of plastic or cloth sheet such as a tarp or bed sheet. A sharp pair of scissors, measuring tape, stick of super glue, sewing machine or needle and thread and or a hot glue gun, a coat hanger, and a pencil marker or piece of chalk. After we have gathered all of the materials it is time to begin making our hanging jewelry organizers.

The first thing that we will need to do is to cut the strips for our pockets to be made out of.

The way that we go about doing this is to cut about ten strips of materials the width of the big piece of material, and the length of about four inches. After cutting the strips, it is now time to attach them to the main piece of material.

The best way that I have found to do is to either take the super glue or hot glue gun and tack the four corners of the strip onto the main piece.

I line up the bottom of the strip with the bottom of the main piece to get a good level line. Once this is done I begin sewing the bottom and the sides of the strap onto the large piece.

The third step after sewing the strip to the material is to sew the lines for the pockets and add the rest of the strips. At this point in the project I usually look at what I am going to be putting in the hanging jewelry organizer to figure out how large or small I want the pockets to be. Once I finish this I measure the sewn strip and sew in the pocket divider with a vertical sewn line.

The closing step is where we adjoin the hanging component to hanging jewelry organizer. This is where we adjoin the coat hanger to the main piece of fabric. At this position every one of the strips should be sewn into the chief material and prepared into pockets. Once this is done cut a small piece of cloth and cut an opening just big enough for the hook part of the coat hanger to fit. Once this is done hem the cloth around the gap as to offer tear support for the hanger when it sustains the organizer. For more information about buildingPocket Hanging Jewelry Organizer and Pocket Hanging Jewelry Organizers categories: hanging jewelry organizer,hanging jewelry organizers,earrings,rings,necklaces,jewelry boxes,jewelry box,jewelry armoire,jewelry,fashion accessories

Trending Articles